Clipper Mold Silicone Spray

Clipper Mold Silicone Spray: A Complete Guide

Clipper Mold Silicone Spray is a specialized and best-selling product for the plastic molding and injection industry. This product is also called a mold lubricant in the Iranian market, which makes it easy to separate parts from the mold. With its special formulation, this product increases production efficiency and minimizes waste.

Technical specifications of Clipper mold silicone spray

Volume: 450 ml
Color: Clear, very pale yellowish
Base: Pure industrial silicone

Flash point: Above 235 degrees
Approved operating temperature: -30 to 90 degrees Celsius
Density: 0.96 grams per cubic centimeter
Viscosity (the amount of resistance of the material to flow): Medium

Special features of Clipper mold silicone spray

– Parts are very easy to remove from the mold
– The force required to remove the part from the mold is reduced
– The material does not stick to the mold – Stability at high temperatures
– Can also be used at high temperatures
– This spray maintains its original properties in harsh conditions

– Corrosion and erosion of the mold are prevented
– Friction is also greatly reduced
– The life of the mold is also somewhat increased

Main applications of mold silicone spray

These sprays are used in the plastic injection industry for blow molds, rotary molds, thermoforming In the rubber industry It is also used in rubber, composite, and elastomer molds.

In other industries, it is used for metal, die-cast, and ceramic molds.

How to use Use this spray

Using Clipper mold silicone spray is very simple.

First, clean the mold well. The cleanliness of the mold is very effective in the final product. All grease and dirt should be removed from the mold.

Before spraying, the mold should be dry.

Preferably use at a temperature between 15 and 45 degrees. Better results will be achieved.

Shake the spray well. Try to shake the spray continuously for 2 minutes.

Spray from a distance of 20 to 30 cm. Try to spray in such a way that the entire surface of the mold is evenly covered.

After spraying, wait about 15 minutes for the silicone to dry.

Now your mold is ready.

Another product that is widely used in the industry is 123 glue. You can purchase this glue in bulk from Amin Afshan Company.

Safety tips and warnings

If you use this product a lot, it is better not to forget a respirator.

It is good to use gloves, but this product does not harm the skin.

Try not to get spray particles into your eyes. And if you spray on your face, wash your eyes with soap and water.

Try to spray outdoors or use this spray in workshops and spaces that are well ventilated.

Do not place these cans and sprays next to furnaces, heat sources, and direct sunlight.

After use, do not leave the spray in nature and throw it in the trash.

This product is best stored between 10 and 25 degrees. Avoid freezing and extreme heat of this spray.

The life of this product after the first use is between 2 and 3 years.

Advantages of silicone mold spray

– Increases production speed. The reason is that the material is easily placed in the mold and product damage is reduced.
– Work waste is greatly reduced. Many molded products are turned into waste and must be re-molded because they are not separated from the mold or are separated incompletely.
– The surface of the molded parts is very uniform and of high quality.
– Savings in consumption
– Increases the life of the mold
– Production efficiency increases and there is no need to stop the production line

Conclusion

Clipper mold silicone spray is one of the important products in molding. We may see it as useless at first glance. But it is enough to use it in your production line for a month. Compare the statistics with before. It may not be unbelievable how much this small spray has increased production and reduced effort. How much the quality of the molded product surface has improved. In the manufacturing industry, especially molding, where accuracy is very important and every small mistake leads to the loss of all efforts, it is better to choose the best materials and products for our molding work.

if you want to know more information about purchasing mold silicone spray in bulk. Click. There are a few points that need to be stated in bulk purchasing. The minimum order is 5 cartons and delivery in Tehran is free of charge within the market area and is loaded from the factory by special vehicles. For the city, transportation from the factory to the desired carrier is completely free.

 

FAQs

1-What is the most important use of silicone spray?

Separating the product from the mold is the most important use of this spray.

 

2-Where can we buy silicone spray?

Amin Afshan Aria Company sells this product in bulk. Also, to purchase it individually, refer to online sites such as DJ Kala.

 

3-What is the use of silicone spray in the automotive industry?

It is widely used in the molding industry. And it has a special use for the production of automotive parts that are prepared in the form of molds.