اسپری انژکتور شور کلیپر

Comprehensive guide to Clipper Injector Spray: Specifications, application and how to use

Clipper Injector Spray is one of the most widely used and important products for cars. This product is used to clean and remove any contamination from the car injector. The injector is related to the car’s fuel supply system. In a way that causes gasoline to be sprayed into the engine in the form of powder and fine particles, and this action provides better car power and also optimizes fuel consumption. The above product has been made by chemists at Amin Afshan Company with an advanced formulation that improves engine performance and reduces fuel consumption.

Product Specifications

– Volume: 450 ml
– Color: Clear yellowish
– Odor: Has a pungent odor
– Flammable
– Vapor pressure: 3.5 bar at 20 degrees Celsius
– Density: 0.87 grams per cubic centimeter

Benefits of using Clipper Injector Cleaner Spray

1. Completely cleans injectors and fuel system from any type of contamination
2. Increases engine power

3. Optimizes fuel consumption
4. Reduces air pollution
5. Improves vehicle starting performance
6. The fuel system does not deposit
7. Increases the life of the vehicle and engine

Applications of Clipper Injector Cleaner Spray

All vehicles that use gasoline fuel can be used
– Vehicles whose fuel consumption has increased over time and their acceleration has decreased
– When the engine vibrates
– Vehicles that start poorly
– The engine does not provide the previous power.

How to use this spray?

Step 1: Preparation

1. Turn off the engine and wait a few minutes for the engine to cool
2. Open the fuel tank of the car
3. Open the hood and remove the air filter.
4. Shake the spray can well

Step 2

1. Install the special nozzle (the same thin tube) on the can
2. Spray the product directly on the injectors
3. Wait 20 minutes
4. Start the engine and let the engine run for 15 minutes.

Safety tips and warnings

– Do not spray directly
– It is better to use gloves and glasses
– Keep out of reach of children
– Avoid storing at high temperatures and direct sunlight
– In case of contact with skin or eyes, wash the area with plenty of water
– Store in a dry and non-humid place

Time and period of use

It is recommended to wash the injectors every 50,000 to 70,000 kilometers.
– If you use low-quality fuels, wash them every 20,000.
– If you are in heavy traffic every day, wash them every 30,000.

نتایج قابل مشاهده

پس از استفاده از اسپری انژکتور شوی کلیپر، نتایج زیر قابل مشاهده خواهد بود:
-مشاهده خواهید کرد موتر به نرمی کار میکند.
– به راحتی متوجه میوید که چقدر استارت ماشین بهتر شده است.
– تعداد دفعات مراجعه شما به پمپ بنزین کمتر میشود.
– شتاب خودرو شما بهتر میشود و این را میتوانید حس کنید
– صدای موتور کم میشود اگر دلیلش آلودگی انژکتورها باشد.
– اگر به اگزوز خودرو دقت کنید متوجه میشوید که دود کمتری خارج میشود.

Product maintenance of the Shor Clipper injector spray

For optimal storage of the Shor Clipper injector spray, pay attention to the following points:
1. Store at a temperature between (15-25 degrees Celsius).
2. Do not expose to direct sunlight and next to furnaces.
3. Close the can tightly after use
4. Do not allow the spray to freeze.

Conclusion

The high-quality Clipper injector cleaner spray with advanced formulation is one of the best products for improving the performance of the car’s fuel system. Regular use of this product will extend the life of the car’s engine and reduce repair costs. Small contaminants will eventually cause major damage and staggering costs, so it is better to prevent major damage at a very low cost right from the start.

To purchase, contact our experts via Telegram, WhatsApp and the phone line. Shipping to Tehran and the Grand Bazaar area is free. Delivery is also provided for the city and shipping to the carrier is the responsibility of Amin Afshan Aria Company. The minimum order is 5 cartons. Amin Afshan Company is the major manufacturer of salt injector spray.

Other products produced by Amin Afshan Aria Company include: Clipper Snow Shadi, Megamax Snow Shadi, Clipper Lighter Gas, Apache Lighter Gas, 123 Glue, Gas Stove Capsule, Mold Silicone Spray and Fragrance Sprays.

FAQs

1-1-Better What is the best injector salt spray in the Iranian market?

There are many high-quality brands in the Iranian market. Clipper injector salt spray is one of the best in a survey conducted among mechanics in the west and north of Tehran.